Weihrauch / Dampa mount (4 Screws /anti-vibration system)
Weihrauch/DAMPA. Monobloc mounts with "SILENT BLOCK" anti-vibration system. Mount your scopes on spring and GAS RAM rifles with this mount, it will prevent breakage, displacement and movement of the scope. Valid for 25 mm (.1") diameter tubes and 11 mm guides - PRODUCT RECOMMENDED BY THE WEIHRAUCH HOUSE FOR ITS RIFLES AND OPTICAL SCOPE - WORLDWIDE SHIPPING
By using this mount, we avoid all the problems that usually occur in an optical sight mounted on a spring or Gas RAM air rifle (or any other system). By using the special Weihrauch/Dampa mount for this type of weapon, you will NOT lose fire regulation or have problems with your scope, the scope will NOT break and you will NOT have unwanted displacements as it happens if you use normal monoblock mounts or two-piece mounts. pieces.
ATTENTION !!! It's not just about using a monoblock mount with 3 or 4 screws, that doesn't work no matter how hard we tighten the screws or the brakes, it's about using the Weihrauch/DAMPA 4-bolt monoblock mount that has a "Silent Block" anti-vibration system mounted on the mount itself, everything else doesn't work. We speak from our own experience.
The "Silent Block" system is a system that includes the Weihrauch DAMPA mount, which causes the mounted optical sight, when the shot is fired, to vibrate independently of the rifle assembly (rifle+mount) with a low intensity frequency, very different of the vibration of the entire rifle, which avoids the problems that we all know produced by the so-called "diapason effect" (effect produced by the vibration of metals with a certain shape) so detrimental in weapons in general.
The operation is simple: the scope does not suffer from the vibration produced by the rifle when shooting because it vibrates in a different plane from the rifle/mount assembly and it does so with a vibration attenuated by the extra strong rubber of the Silent Blocks that keep it attached to the body of the rifle (weapon assembly) by the mount, but they prevent the intense vibration transmitted by the spring of the shot from reaching the scope, with which the problems disappear, there are no imbalances because the vibration of the shot does not reach it.
How does the Weihrauch/DAMPA mount system work? It's easy: The base of the mount forms a whole with the rifle and will vibrate together with it as a single mass, that's why the 4 screws that hold it to the weapon have to be tightened strongly, but the scope held by the rings of the The mount forms a vibrating mass independent of the rifle/base assembly because it is joined to that main mass by two extra-strong rubber studs (Silent Block system) on which the rings that hold the scope are mounted. Result of this?: When the rifle is fired, most of the vibration is transmitted to the rifle/mount base assembly and due to the effect of the Silent Block rubbers, only a small part of that vibration is transmitted to the scope, minimal part that also vibrates with a different frequency much more attenuated. Once the vibration of the larger assembly is exhausted, the scope returns to its initial position due to the effect of the rubber supports that hold the entire assembly, which means that the calibration of the aiming system is never lost. (The rubber that makes up the Silent Block is a very robust material that at first glance looks like metal)
Actually, the modifications in the position of the viewfinder, mount rings etc. due to the effect of the vibration of the shot it is minimal, almost imperceptible, the shooter cannot see it but the fact is there and it occurs and the result is a perfect operation, the problems disappear.
Using this mount, you adjust your rifle ONCE and the adjustment stays forever, it's that simple.
We, in our field tests with Weihrauch rifles, use these original Weihrauch mounts and scopes. The scopes don't go out of adjustment no matter how many shots we take and the accuracy of the rifles is simply superb with them. Adjusting the rifle is easy, it is the same as adjusting a PCP rifle, once the ideal adjustment is reached we forget, we will not have problems.
Use Weihrauch scopes are ideal for the correct operation of Weihrauch spring rifles. This is a fact verified by us in all our tests. Bear in mind that armasayala.com always tests all the models of weapons that it sells, we not only buy and sell, we know how each of the pistols and carbines that we sell work and we know what elements are suitable for the weapon to work properly. perfection.
The sights that the Weihrauch house offers its clients are of the appropriate size for use in spring rifles, Gas RAM, etc., they have sufficient magnification for an accurate shot at 50 meters with good optical quality and a good finish and function and they are specially manufactured for use in rifles with mechanical vibration on firing. Mounting scopes with higher magnifications, larger tube diameters, or non-special scopes for this type of rifle is a lottery that very possibly ends badly.
TO USE A SCOPE ON SPRING RIFLES AND NOT HAVE PROBLEMS OF UNWANTED MOVEMENTS, BREAKS, LOSS OF ADJUSTMENT ETC. ALWAYS MOUNT ORIGINAL WEIHRAUCH/DAMPA 4-SCREW MOUNTS WITH SILENT BLOCK ANTI-VIBRATION SYSTEM. IT IS NOT VALID TO THINK THAT A 4 SCREW, ROBUST AND CUSHIONED MOUNT IS WORTH LITTLE MONEY, A GOOD MOUNT IS WORTH MONEY, IN FACT, IN LONG FIRE ARMS, THERE ARE MOUNTS THAT HAVE MORE VALUE THAN THE RIFLE ITSELF. IF YOU USE CHEAP FRAMES, EVEN IF THEY ARE MONOBLOC, YOU WILL ONLY GET WHAT YOU PAY FOR, LITTLE OR NOTHING BECAUSE YOU WILL ONLY HAVE PROBLEMS. DON'T GO TO THE STORE TWICE, BUY THE GOOD THINGS DIRECTLY, BUY THE ORIGINAL WEIHRAUCH/DAMPA MOUNT, YOUR RIFLE WILL WORK PERFECTLY, THE SCOPE WILL NOT MOVING, YOU WILL NOT HAVE PROBLEMS WITH ADJUSTMENT AND EVERYTHING WILL BE ENJOYED AND REMEMBER, NO ONE IS GIVEN ANYTHING .Using this mount we avoid the movements and displacements of the scopes in the spring compressed air or GasRAM rifles. Using the Weihrauch / Dompa mount, you will not lose shot regulation or have problems with your scope as is the case if you use normal monobloc frames.